HGH45HA Block-manufacture,factory,supplier from China

What is hot installation of machine tool bearings? How should we heat up the bearings of machine tools? Machine tool bearing hot installation generally refers to a heating process that involves installing the inner trap of the bearing onto the bearing block of the transmission shaft, and is divided into two processing processes: hot installation (or hot installation) and cold installation.

Air bearings and magnetic levitation bearings are both high-precision, non-contact bearing technologies, but their principles and application scenarios are different.1.Principle: Air bearings use the compression of gas to generate support force, which floats the rotor and achieves the function of bearings. The supporting force of air bearings mainly consists of two parts: one is the air film pressure, and the other is the inertial force.

At the 2024 China Automotive Forum held on July 12th, SKF was awarded the "2024 China Automotive Industry Sustainable Development Practice Outstanding Award" by the China Association of Automobile Manufacturers.

From September 30 to October 5, 2024, Türkiye Machine Tool Exhibition will be held in Istanbul as scheduled. During the exhibition, we received business cards from customers from Türkiye, Iran, Russia and many other countries, felt the enthusiasm of visitors and recognition of our products, and looked forward to cooperating with them.                                                         

When replacing peripheral parts of the device, carry out regular maintenance, operational checks and inspections of the removed bearings to determine whether they can be reused and whether they are in good or bad condition.First, carefully examine and note the removed bearings and their appearance. To clarify and check the amount of residual grease, the bearings must be thoroughly cleaned&nbs

Annealing, also known as simmering, code name Th, is the process of heating a steel piece to Ac1 or Ac3 or above (30-50 ℃), holding it for a period of time, and then slowly cooling it (usually using furnace cooling).Normalization, also known as open flame, code Z, is the process of heating steel parts to Ac3 or Acm or above (30-50 ℃), holding them for a period of time, and then cooling them in air at a slightly faster cooling rate than annealing.The main difference between bearing annealing and normalizing is that normalizing is a deformation or special case of complete annealing, and the only

The so-called burn damage state of  bearings refers to the rapid heating of the raceway wheel, rolling element, and retainer of  bearings during rotation until discoloration, softening, deposition, and damage occur.The main reason for bearing burns is due to poor lubrication of  bearings, which may have used non-standard lubricants or excessive or insufficient lubricants, both of which are incorrect. Secondly, it may be due to excessive load (excessive preloading). The rotational speed is too high. The clearance is too small. There is water or other foreign objects invading.

In modern industrial production, the performance of bearings directly affects the efficiency and lifespan of equipment. Especially in high load and high-speed applications, FAG bearings are widely used due to their excellent design and manufacturing processes. However, various industries also face a series of pain points when using FAG bearings, which often lead to reduced production efficiency, frequent equipment failures, and even affect the stability of the entire production line.

When determining whether the dismantled bearing can be reused, it is necessary to inspect the condition of the raceway surface, rolling surface, mating surface, wear of the cage, whether the bearing clearance has increased, and whether there are any damages or abnormalities that affect the decrease of dimensional accuracy after cleaning the bearing.

In Shanghai,the 2023PTC exhibition was held as scheduled.On October 24-27, the 2023 Asia International Power Transmission and Control Technology Exhibition (PTC ASIA) opened grandly at the Shanghai New International Expo Center. This exhibition highlights the theme of "digital intelligence empowerment, innovation and upgrading", with an exhibition area of nearly 100000 square meters, attracting over 1500 enterprises from multiple countries and regions such as Germany and Italy to participate. As a leading enterprise in the Chinese bearing industry, Renben，TIMKEN,etc.